Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Slot perpendicular to center line of holes, end of which is 0.614 in. From one hole center
NSN
National Stock Number:
TXT
Description:
Strain Insulator
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.499 inches and 1.501 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.217 inches and 0.221 inches
MRC:
The maximum potential gradient that the insulating material can withstand per mil /0.001 inch/ thickness without rupture.ACGY
Dielectric Material Voltage Rating Per Mil Thickness In Volts:
Not rated
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
Between 0.120 inches and 0.130 inches
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
1 unthreaded hole
First End Radius:
0.125 inches
First Slot Width:
Between 0.228 inches and 0.231 inches
Conductor Separation Distance:
Between 1.249 inches and 1.251 inches
First Slot Depth:
Between 0.061 inches and 0.067 inches
Wire Hole Diameter:
Between 0.123 inches and 0.124 inches
First Distance From Conductor Hole To Insulator End:
0.125 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, polytetrafluoroethylene err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, polytetrafluoroethylene
