Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Nonmetallic Angle
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
35.0 shore durometer a and 45.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
900 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees celsius and 100.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.980 inches and 1.100 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.120 inches and 0.140 inches
Left Side Flange Thickness:
Between 0.058 inches and 0.078 inches
Left Inside Angle In Deg:
90.0
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Oil resistant and tear and low temperature and heat dry and weather resistant
Outer Radius Where Left Flange Joins Base Flange:
Between 0.088 inches and 0.108 inches
Base Flange Thickness:
Between 0.120 inches and 0.140 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the base flange tip.BHQV
Base Flange Tip Style:
Base square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 3240 assn standard single material response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81343-ams 3240 professional/industrial association standard
