Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
For efficiency, determine length of time it takes for baskets to become approximately 1/3 clogged. If strainer is equipped with a blow down valve and open bottom basket, open valve until sediment is removed. where stainer is not fitted for blow down remove top cover and clean basket. Replace basket in strainer in original position and tighten cover. Replace gasket if necessary. Spare basket will facilitate shorter shut down time. pressure gauge installed before and after strainer in line will indicate pressure loss due to clogging and may be used as a guide to determine cleaning is required
NSN
National Stock Number:
TXT
Description:
Sediment Strainer
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Inlet connection line and outlet connection line
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
21.625 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
26.375 inches
MRC:
The length of a straight line which passes through the center of the wire,and terminates at the circumference.AGCW
Wire Diameter:
0.010 inches
MRC:
The length of a straight line which passes through the center of the opening,and terminates at the circumference.AKSV
Perforation Diameter:
0.156 inches
MRC:
A numeric value which represents the number of perforations contained in the item.AKSW
Perforation Quantity:
33.0 per square inch
MRC:
A numeric value which represents the number of openings per lineal inch.AKSX
Mesh Size:
40.0
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
100.0 degrees fahrenheit
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
285.0 pounds per square inch
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Mesh 1st filtering media response
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Perforated 2nd filtering media response
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Raised face flange line
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Raised face flange center
MRC:
Indicates the first discharge connection relationship to an intake connection.CSJR
First Discharge Connection Relationship To Intake Connection:
Identical to first intake connection
Distance From Bottom Of Body To Center Of Inlet:
16.000 inches
First Intake Flange Outside Diameter:
16.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the flange.CSTD
First Intake Flange Shape Style:
Round w/unthreaded bolt holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange face.CTBJ
First Intake Flange Face Style:
Raised
First Intake Flange Thickness:
1.188 inches
First Intake Flange Raised Face Height:
0.062 inches
First Intake Flange Raised Face Diameter:
12.750 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304 filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Water
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Diverted flow basket strainer w/bolted cover
