Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Machine Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.468 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
4.656 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.140 inches and 0.172 inches
Width Between Flats:
Between 0.428 inches and 0.440 inches
MRC:
The length of a straight line which passes through the center of the shank unthreaded hole,and terminates at the inside circumference.AAWB
Shank Unthreaded Hole Diameter:
0.076 inches first hole
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.250 inches
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
4.188 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Finished head
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
62000 pounds per square inch
MRC:
The distance from the shank hole centerline to the largest bearing surface of the head.CRZS
Distance From Head Largest Bearing Surface To Shank Hole Center:
4.500 inches first hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 3003 or aluminum alloy 2014 or aluminum alloy 2024 or aluminum alloy 5083 or aluminum alloy 5086 or aluminum alloy 5454 or aluminum alloy 5456 or aluminum alloy 6053 or aluminum alloy 6063 or aluminum alloy 7075 or aluminum alloy 7178 or aluminum alloy 1100 or aluminum alloy 2011 or aluminum alloy 2017 or aluminum alloy 5052 or aluminum alloy 2117 or aluminum alloy 5056 or aluminum alloy 6061
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 3003 or aluminum alloy 2014 or aluminum alloy 2024 or aluminum alloy 5083 or aluminum alloy 5086 or aluminum alloy 5454 or aluminum alloy 5456 or aluminum alloy 6053 or aluminum alloy 6063 or aluminum alloy 7075 or aluminum alloy 7178 or aluminum alloy 1100 or aluminum alloy 2011 or aluminum alloy 2017 or aluminum alloy 5052 or aluminum alloy 2117 or aluminum alloy 5056 or aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200 federal specification 1st material response or qq-a-225 federal specification 1st material response or qq-a-430 federal specification 1st material response or qq-a-200 federal specification 2nd material response or qq-a-225 federal specification 2nd material response or qq-a-200 federal specification 3rd material response or qq-a-225 federal specification 3rd material response or qq-a-430 federal specification 3rd material response or qq-a-200 federal specification 4th material response or qq-a-200 federal specification 5th material response or qq-a-200 federal specification 6th material response or qq-a-200 federal specification 7th material response or qq-a-430 federal specification 8th material response or qq-a-200 federal specification 9th material response or qq-a-200 federal specification 10th material response or qq-a-200 federal specification 11th material response or qq-a-200 federal specification 12th material response or qq-a-225 federal specification 12th material response or qq-a-430 federal specification 12th material response or qq-a-200 federal specification 13th material response or qq-a-200 federal specification 14th material response or qq-a-225 federal specification 15th material response or qq-a-430 federal specification 15th material response or qq-a-225 federal specification 16th material response or qq-a-225 federal specification 17th material response or qq-a-430 federal specification 17th material response or qq-a-225 federal specification 18th material response or qq-a-430 federal specification 18th material response or qq-a-225 federal specification 19th material response or qq-a-430 federal specification 20th material response or qq-a-430 federal specification 21st material response or qq-a-200 federal specification 22nd material response or qq-a-225 federal specification 22nd material response or qq-a-430 federal specification 22nd material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize or chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625 military specification 1st treatment response or mil-c-5541 military specification 2nd treatment response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
