Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Abrasive Disk
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
4.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.625 inches
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Metal working
MRC:
The means of attaching the item.ADJH
Mounting Method:
Arbor hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Round with four slots
MRC:
The element,compound,or mixture of which the abrasive is fabricated,excluding any backing material,binder,mix,or lubricant.AHCM
Abrasive Material:
Aluminum oxide
MRC:
A designation indicating the rated size of the individual particles,sometimes expressed as a mesh size.AHCN
Screen Grit Size Designator:
24
MRC:
Indicates the type of disk by the shape arrangement of the coated abrasive formed as a result of die cutting.AHCP
Abrasive Disk Type:
Plain slotted
MRC:
The number of die cut slots on the outer circumference of the abrasive disk.AHCQ
Abrasive Disk Slot Quantity:
4
MRC:
A measurement of the longest dimension of an abrasive disk slot,in distinction from width.AHCR
Abrasive Disk Slot Length:
0.500 inches
MRC:
The element,compound,or mixture of which the backing is fabricated,excluding any surface treatment.AHCV
Backing Material:
Fiber, vulcanized
MRC:
An indication of whether or not an adhesive backing is included.AHCX
Adhesive Backing:
Not included
MRC:
Indicates the type of abrasive coating utilized by the spacing /with or without voids/ of the mineral abrasive grains applied to the backing material.AHCY
Backing Abrasive Coating Type:
Closed
MRC:
An indication of whether or not a waterproof feature is included.AKSS
Waterproof Feature:
Not included
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
As modified by 1/2 in. Slots
