Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Sleeve, flared, tube fitting-aluminum
NSN
National Stock Number:
TXT
Description:
Tube Fitting Flared Sleeve
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.422 inches and 0.454 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fleet combat support mh-60s, h-60 helicopter.
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
Between 0.140 inches and 0.172 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
Between 0.445 inches and 0.448 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
33.0
MRC:
The length of a straight line which passes through the center of the sleeve,with terminated points on the outside circumference.ARYW
Sleeve Outside Diameter:
Between 0.363 inches and 0.366 inches
MRC:
The length of a straight line which passes through the center of the hose or tube for which the item is designed,and terminates at the outside circumference.CPMS
Hose/tube Outside Diameter For Which Designed:
0.313 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material can also be ams 4112; finish dyed blue; seat has a double angle, first angle is 18 degrees 30', second angle 33 deg.
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy, ams 4121
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2014
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Sleeve
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Anodized, ams 2470
