Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Aviation Turbine Fuel
MRC:
The percentage by weight of the maximum sulphur content of the item.CLFT
Maximum Sulphur Content Percentage By Weight:
0.3
MRC:
An indication of the maximum temperature at which the item will freeze.CLFZ
Freezing Point Maximum Temp:
-50.0 degrees celsius
MRC:
A classification indicating the rated grade of the fuel.CLWH
Fuel Grade Classification:
Kero/b
MRC:
An indication of the absolute vapor pressure of volatile petroleum products.CLWJ
Reid Vapor Pressure Rating:
Between 14.0 kilopascals and 21.0 kilopascals
MRC:
A measurement of the maximum aromatics occuring in the item,expressed in percent by volume.CRWW
Maximum Aromatics Percentage By Volume:
25.0
MRC:
An indication of the maximum temperature at which a certain distillation point is reached,expressed in percent.CRWZ
Distillation Point Percentage At Maximum Temp:
90-145 degrees c at 20pct, 110-190 degrees c at 50 pct and 245 degrees c at 90 pct
MRC:
An indication of the maximum amount of matter remaining after distillation,expressed in percent.CSLJ
Maximum Distillation Residue Volume Percentage:
1.5
MRC:
The numeric value indicating the ratio of the mass of a body to the mass of an equal volume of water at 15.56 degrees celsius.CSMS
Specific Gravity Value At 15.56 Deg Celsius:
15.560
MRC:
An indication of the astm copper corrosion classification in accordance with ip 154,astm d130 at 100 deg celsius.CSTK
Copper Corrosion Classification Number:
1
MRC:
The quotient of the product mass by its volume at a specified temperature.CSWR
Density Value:
Between 751.000 kilograms per cubic meter and 802.000 kilograms per cubic meter
MRC:
The number of thermal units which is released by combustion of the mass unit of the fuel (formed,uncondensed water) in oxygen.CTCF
Minimum Heat Of Combustion Value:
42.8 megajoules per kilogram
MRC:
An indication of the maximum amount lost by distillation,expressed in percent.CTDH
Maximum Distillation Loss Volume Percentage:
1.5
MRC:
The temperature at which the density is determined.CTYG
Density Temp:
15.0 degrees celsius
MRC:
A classification used to identify the supply form by which the item is delivered.CWAY
Supply Classification:
Bulk
MRC:
The mass,in milligrams,of the residue obtained by evaporation of 100 milliliters of the product.CWDB
Maximum Amount Of Existent Gum:
7.0
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81348-astmd1655 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
