Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Shoulder 20 pitch diamond knurled and undercut between shoulder and shank 0.03 in. W by 0.02 in. Deep
NSN
National Stock Number:
TXT
Description:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Round
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
Between 0.240 inches and 0.260 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 0.140 inches and 0.160 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.1232 inches and 0.1234 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.490 inches and 2.510 inches
Undercut Diameter:
Between 0.010 inches and 0.030 inches
Undercut Width:
Between 0.020 inches and 0.040 inches
Second Undercut Width:
Between 0.020 inches and 0.040 inches
Second Undercut Diameter:
Between 0.010 inches and 0.030 inches
First End Taper Length:
Between 0.021 inches and 0.041 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
Second Shank Diameter:
Between 0.1232 inches and 0.1234 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shank end
First End Taper Angle:
Between 44.0 degrees and 46.0 degrees
First End Outer Radius:
Between 0.010 inches and 0.030 inches
Second Shank Length:
Between 0.240 inches and 0.260 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, cond a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Undercut
