Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Beach filters. The t-line model f-t20c is a high tech 3 stager filter for compressed air and gases rated at 20scfm at 100psi; air flow rate 100.0; operating pressure 250.0 psi
NSN
National Stock Number:
TXT
Description:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered hole,and terminates at the circumference.AAZL
Tapered Hole Minor Diameter:
0.2500 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
4.6250 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
4.6250 inches
MRC:
The length of a straight line which passes through the center of the largest end of a tapered hole,and terminates at the circumference.ADMT
Tapered Hole Major Diameter:
2.000 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
0.30
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outside in or inside out
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
1.5 pounds per square inch
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Goes on b7173 hydrocarbon filter assembly used on interstage membrane dehydrators system
MRC:
Indicates the design type of the item.APGF
Design Type:
Reusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
180.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
10.5625 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Porous single filtering media response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane body
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air or gas
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/ container (rigid)
