Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Hub aft endreduced from 6.000 in. Diameter for a depth of 0.500 in. To meet dim. Of pac anak
NSN
National Stock Number:
TXT
Description:
Marine Propeller
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.561 inches and 0.562 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
Between 0.291 inches and 0.294 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
1
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
Between 6.740 inches and 6.760 inches
MRC:
The number of individual blades included.AJLB
Blade Quantity:
4
MRC:
An indication of the type of propeller.AMWD
Propeller Type:
Fixed pitch
MRC:
The direction in which an item is designed to rotate,when viewed axially.AMWW
Rotation Direction:
Left-hand
MRC:
The maximum allowable diameter of the circle produced by the extreme tip of the item.AMWY
Span Maximum Diameter:
2.333 feet
MRC:
The mean distance of forward movement for each revolution of the item.AMXB
Design Pitch:
2.333 feet
MRC:
An indication of the type of blade pitch.AMXG
Blade Pitch Type:
Constant
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub shaft accommodation.AMYP
Hub Shaft Accommodation Style:
Taperbore w/ keyway
MRC:
Indicates the streamilining device included on the item.AMYX
Streamlining Device Type:
Fairwater cap
Hublength:
Between 6.740 inches and 6.760 inches
Hub Forward Face Diameter:
9.125 inches
Hub Aft Face Diameter:
Between 4.993 inches and 5.007 inches
MRC:
The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL
Taper Bore Major Diameter:
Between 2.249 inches and 2.251 inches
MRC:
The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM
Taper Bore Minor Diameter:
Between 1.827 inches and 1.829 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Copper alloy, qq-c-390, alloy c3
