Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Hydraulic Brak Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Iron, cast
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Threaded mounting holes
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.481 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.545 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
1.325 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Scrubber, self propelled, star industries, inc, model 60n
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
42.0 single port
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance,and an external or internal threaded mounting facility.AKBM
Mounting Facility Thread Class:
2b
MRC:
The direction of the threads of a mounting facility when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AKBN
Mounting Facility Thread Direction:
Right-hand
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Straight
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting provision(s).BBBW
Mounting Provision Arrangement Style:
Two hole
MRC:
The installed position for which the item is designed.BBJX
Mounting Position:
Right
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Bleeder valves and rubber boot
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The length of a straight line which passes through the center of the mounting facility which would bound the crest of an external thread or the root of an internal thread.CDTF
Mounting Facility Thread Diameter:
0.250 inches
MRC:
The number of threads on the mounting facility per linear inch measured on a line parallel to the thread axis.CDTG
Mounting Facility Thready Qty Per Inch (tpi):
20
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Flange center section
MRC:
The length of the threaded portion of the mounting facility.CLMN
Mounting Facility Thread Length:
0.312 inches
Center To Center Distance Between Mounting Provisions:
1.250 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 center section
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Inverted flare single port
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Unf single port
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
0.375 inches single port
MRC:
A measurement of the number of screw threads on the port per linear inch,including incomplete threads,on a line parallel to the thread axis.CLMY
Port Thready Qty Per Inch (tpi):
24 single port
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal port thread.CLNB
Port Thread Class:
2b single port
MRC:
The number of bleeding features included.CLND
Bleeding Feature Quantity:
1
