Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Make from 0.106 diameter music wire; to support 11.25 plus or minus 1 pound at 2.50 length; spring to work in 2.00 inch hole; permanent set not to exceed .10 inches
NSN
National Stock Number:
TXT
Description:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.760 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C130p aircraft
Spring Free Length:
8.500 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
15
Spring Solid Length:
2.500 inches
Spring Solid Outside Diameter:
Between 1.950 inches and 1.980 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
1.875 pounds per inch
Spring Free Outside Diameter:
Between 1.950 inches and 1.980 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel uns k08500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-470 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-8837, class 1, type 1 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
