Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Line Actuating Cylinder Assembly
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Any acceptable
First End Outside Diameter:
3.000 inches
MRC:
The provision/s/ for mounting the item.ABDR
Mounting Provision:
Pin
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
125.0 degrees fahrenheit
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-10.0 degrees fahrenheit
MRC:
A measurement of the longest dimension of a mounting facility,in distinction from width.ABKP
Mounting Facility Length:
1.375 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
7.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
10.000 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
5.500 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
Any acceptable
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
1.501 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
1.502 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Unable to decode
First End Thickness At Mounting Holes:
2.000 inches
MRC:
A measurement of the smallest length to which the item may be compressed,in distinction from width.AMQZ
Compressed Length:
36.625 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
61.250 inches
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
1500.0 pounds per square inch
MRC:
An indication of the design characteristics of the item.CKSD
Design Characteristics:
Double acting single cylinder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first piston rod end.CKSF
First Piston Rod End Style:
Bearing type
MRC:
Indicates the type of mounting and the location on the item.CLML
Mounting Type And Location:
Trunnion center section
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
1.497 inches
MRC:
The length of a straight line which passes through the center of the mounting facility,and terminates at the circumference.CLMQ
Mounting Facility Diameter:
1.499 inches
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 cylinder head end
MRC:
Indicates the location and number of ports on the item.CLMS
Port Location And Quantity:
1 piston rod end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the port.CLMT
Port Style:
Gasket seal
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter on the port.CLMW
Port Thread Series Designator:
Nptf
MRC:
The length of a straight line which passes through the center of the port and would bound the crest of an external thread or the root of an internal thread.CLMX
Port Thread Diameter:
0.750 inches
MRC:
The industrial size designation used to indicate the diameter of the port pipe thread.CLMZ
Port Pipe Thread Size:
0.750 inches
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Truck, lift, fork
