Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Style b6 except four mtg holes each end
NSN
National Stock Number:
TXT
Description:
Control Motor
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
3.188 inches
MRC:
A measurement of the longest dimension of an item,in distinction from width.AAJU
Overall Length:
5.188 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.AAJV
Overall Width:
2.625 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.470 inches second end
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.062 inches first end
MRC:
A measurement between specified points of the hole,in distinction from height.AAZQ
Hole Depth:
0.187 inches first end
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.250 inches second end
Flatted Portion Length:
0.437 inches first end
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac input
Flat Depth:
0.015 inches first end
Hole Center To Shaft End Distance:
0.250 inches first end
MRC:
The maximum altitude at which the item is rated to function.AKAE
Maximum Operating Altitude Rating:
50000.0 feet
MRC:
The means of attaching the item.AXGY
Mounting Method:
Pad
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
8 unthreaded hole
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Nonventilated
MRC:
The current rating of the control field,expressed in amperes.BFMJ
Control Field Current Rating In Amps:
0.230
MRC:
The impedance rating of the control field,expressed in ohms.BFMK
Control Field Impedance Rating In Ohms:
460.0
MRC:
Indicates the type of winding(s) of the control field.BFML
Control Field Winding Type:
Two windings, parallel connected
MRC:
The means by which the current is rated.BKPB
Current Rating Method:
No load
MRC:
Indicates the torque rating,and its type.BKPH
Torque Rating And Type:
14.0 inch-ounces stalled
MRC:
Indicates the type of control field voltage and its rating,expressed in volts.BKPS
Control Field Voltage Type And Rating In Volts:
115.0 ac
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Horizontal mounting position and vertical mounting position
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.138 inches second end
MRC:
The speed rating of a rotor,expressed in revolutions per minute.CWFX
Rotor Speed Rating In Rpm:
1800.0 single no load
MRC:
The nominal center to center distance between the mounting facilities parallel to the width.CWFY
Center To Center Distance Between Mounting Facilities Parallel To Width:
2.298 inches
MRC:
The nominal center to center distance between the mounting facilities parallel to the height.CWGD
Center To Center Distance Between Mounting Facilities Parallel To Height:
2.298 inches
MRC:
The amount of current for which an item is rated,expressed in amperes.CWGL
Current Rating In Amps:
0.230 single input
MRC:
Indicates the type of connection,rating sequence,and voltage rating at which the item is designed to operate,expressed in volts.CWGQ
Connection Type And Voltage Rating In Volts:
115.0 line to neutral single input
MRC:
An indication of the characteristic(s) of the shaft end.CWHZ
Shaft End Characteristic:
A2 first style second end and a4 second style second end
MRC:
An indication of the characteristic(s) of the shaft end.CWHZ
Shaft End Characteristic:
A5 first style first end and a13 second style first end
MRC:
The number of alternating current phases.FAAZ
Phase:
Single input
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0 input
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf second end
