Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Tube centrifuge plas polypropylene k8 threaded top 50ml cap 500s
NSN
National Stock Number:
TXT
Description:
Centrifuge Tube
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
115.00 millimeters
MRC:
The length of a straight line which passes through the center of the tubing,and terminates at the outside circumference.AQRX
Tubing Outside Diameter:
30.00 millimeters
MRC:
An indication of the marking(s) on the scale.ASTW
Scale Marking:
50.0 ml, 45.0 ml, 40.0 ml, 35.0 ml, 30.0 ml, 25.0 ml, 20.0 ml, 15.0 ml, 10.0 ml, 7.5 ml, 5.0 ml
MRC:
A measurement of the capacity of an item.BBLT
Capacity Rating:
50.000 milliliters
MRC:
A designation of the function which is calibrated.BJBS
Calibration Function:
To contain
MRC:
Indicates the type of container/s/ or supporting device/s/ which is in direct contact with the item.CQCT
Primary Container Type:
Case
MRC:
Indicates the increments of measure on the scale.CQPX
Scale Graduation Unit:
2.5 milliliters 1st interval single scale
MRC:
Indicates the increments of measure on the scale.CQPX
Scale Graduation Unit:
5.0 milliliters 2nd interval single scale
MRC:
The number of items of supply within each primary container.CQTF
Primary Container Unit Quantity:
500
MRC:
The number of primary containers within the item of supply.CSCW
Total Primary Container Quantity:
1
MRC:
Indicates the reading direction of the scale.CSTJ
Scale Reading Direction:
Bottom to top outside single scale
MRC:
Indicates the range of the increments of measure on the scale.CTBL
Scale Graduation Unit Range:
+5.0/+10.0 milliliters single interval single scale and +11.0/+50.0 milliliters single interval single scale
MRC:
Indicates the range of the increments of measure on the scale.CTBL
Scale Graduation Unit Range:
+5.0 to 10.0 milliliters and +11.0 to 50.0 milliliters single interval single scale
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
W/polyethylene screw cap
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, polypropylene
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polypropylene
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Threaded top conical bottom
