Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Rivet, blind, high strength, pull type, 100 degree flush reduced head, 112 ksi shear
NSN
National Stock Number:
TXT
Description:
Blind Rivet
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.190 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Self-plugging
Head Major Diameter:
0.244 inches
MRC:
The device by which the item is expanded and set.ABAF
Expansion Device:
Serrated stem-type w
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-16 aircraft
MRC:
A measurement of the longest dimension of the grip,in distinction from width.ANEE
Grip Length:
Between 0.312 inches and 0.376 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
32.0 rockwell c sleeve and 45.0 rockwell c sleeve
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
48.0 rockwell c mandrel and 53.0 rockwell c mandrel
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
Between 99.0 degrees and 101.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material breakdown as follows, sleve, alloy steel 4027 or 4037 per chemical requirements of astm a752; serrated pin is alloy steel 8740 per chemical requirements of mil-s-6049 or astm a752; mechanical lock is carbon or alloy steel conforming to chemical requirements of 1010, 1020, 1144, 4037 or 4130 of federal standard 66, a286 cres conforming to ams 5737 or 316 cres per ams5690; finish, sleeve , cadmium plate per qq-p-416, type 2 class 2; serrated pin, cadmium plate per qq-p-416, type 2 class 3 and per mil-f-81177; mechanical lock, cadmium plate per qq-p-416 type 2 class 2 (carbon and alloy steel) and cres passivate per qq-p-35
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4027 sleeve or steel comp 4037 sleeve
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astma752 assn standard single material response sleeve
