Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Standoff, locking thread, composite base
NSN
National Stock Number:
TXT
Description:
Spacing Threaded Standoff
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3b left internal (includes through thread)
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand left internal (includes through thread)
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.472 inches left internal (includes through thread)
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
1.250 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.100 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.310 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
0.462 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Global hawk
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 left internal (includes through thread)
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.190 inches left internal (includes through thread)
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Baseplate material is carbon/epoxy 350 degrees cure; standoff attached by adhesive applied to bottom of baseplate
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron alloy 660 standoff or steel comp 302 standoff or steel comp 303 standoff or steel comp 304 standoff or steel comp 303se standoff or steel comp 304l standoff or steel comp 303ma standoff
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5525 assn standard single material response standoff or ams 5731 assn standard single material response standoff or ams 5732 assn standard single material response standoff or ams 5734 assn standard single material response standoff or ams 5737 assn standard single material response standoff or ams 5516 assn standard single material response standoff or ams 5636 assn standard single material response standoff or ams 5637 assn standard single material response standoff or ams 5640 assn standard single material response standoff or ms 5513 assn standard single material response standoff or ams 5639 assn standard single material response standoff or asm 5641 assn standard single material response standoff or ms 5647 assn standard single material response standoff
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate standoff
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams 2700 assn standard single treatment response standoff
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flanged left internal thread
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf left internal (includes through thread)
