Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Electrical Contact Brush Holder
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
1
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Threaded hole
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.156 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.704 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
0.656 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
0.156 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
0.687 inches
MRC:
Indicates whether or not a contact end bevel is included.ANCR
Contact End Bevel:
Not included
MRC:
Indicates the location of threads on the top of the item.ANCS
Top Thread Location:
External
MRC:
An indication of whether or not a cap is included.ANCZ
Cap:
Not included
MRC:
Indicates the type of brush pressure spring(s) the item accommodates.ANDA
Brush Pressure Spring Type Accommodated:
Helical compression
MRC:
Indicates whether or not the brush spring is adjustable.ANDB
Brush Spring Adjustability:
Nonadjustable
MRC:
Indicates whether or not a brush pressure spring(s) is included.ANDC
Brush Pressure Spring:
Not included
MRC:
The number of brushes accommodated in each holder.ANDT
Brush Quantity Accommodated Per Holder:
1
Inside Thickness:
0.234 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Brass box
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Silver plated box
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Press fit
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round angle offset
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
98230-ce88016 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
0.375-32 unef
