Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Two brass rectangularpieces brazed to the inside bore, 180 degrees apart
NSN
National Stock Number:
TXT
Description:
Wearing Ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange w/external locking flange
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.906 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 2.996 inches and 2.998 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.590 inches and 2.592 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.375 inches inside right corner
Left Side Flange Thickness:
0.093 inches
Right Side Flange Thickness:
0.188 inches
Distance Between Flanges:
Between 0.625 inches and 0.627 inches
End To Flange Distance:
0.812 inches
Internal Flange Inside Diameter:
2.062 inches
Internal Flange Width:
0.406 inches
Smallest External Anchor Flange Radius:
1.406 inches
Largest External Anchor Flange Radius:
1.688 inches
Distance Below Centerline:
0.125 inches
Distance From End:
0.312 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
