Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Head meterial ductile iron mil-i-24137; interior finish zinc phosphate dip; exterior finish gray lacquer primer paint; approx fluid volume 3 pints; inlet, outlet and drain connections per ms-16142
NSN
National Stock Number:
TXT
Description:
Fluid Filter
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Unthreaded hole head
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.560 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
3
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
4.750 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
4.000 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
10.812 inches
MRC:
The difference in opposing pressure which an item is capable of withstanding without evidence of deformation or other damage.ADNQ
Differential Pressure:
900.0 pounds per square inch
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Filter; w/s arleigh burke class ddg
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
250.0 degrees fahrenheit
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Drain plug
MRC:
The number of filtering elements provided.CCZM
Filtering Element Quantity:
1
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
300.0 pounds per square inch
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Threaded internal pipe head side
MRC:
Indicates the first discharge connection relationship to an intake connection.CSJR
First Discharge Connection Relationship To Intake Connection:
Identical to first intake connection
Distance From Bottom Of Body To Center Of Inlet:
9.375 inches
MRC:
A designation distinguishing one group of thread diameter-pitch combination from another by the number of threads per measurement scale for a specific diameter.CTDY
First Intake Thread Series Designator:
Unf
MRC:
A designation that is used for the purpose of general identification of the thread.CTGK
First Intake Thread Size:
1.0625 inches
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.CWNZ
First Intake Thread Class:
2b
MRC:
The direction of the thread when viewed axially.a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CXPF
First Intake Thread Direction:
Right-hand
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel container/cartridge
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint body
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Leak test 100 percent at 50 to 60 psi under water
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Unthreaded shell
