Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Engine assembly
NSN
National Stock Number:
TXT
Description:
Nonaircraft Gas Turbine Engine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Aircraft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 45.460 inches and 46.460 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 17.700 inches and 18.700 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 25.500 inches and 26.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
B-2 aircraft
MRC:
The power output for which the item is designed.AXKD
Power Output For Which Designed:
Pneumatic
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Current type: dc; furnished items: gearbox assembly, permanent magnetic generator, oil pump assembly, fuel control, pneumatic turbine starter; inclosure: not included; air flow rate: 302.1 lbs per minute; discharge pressure rating: 65.77 psi; volts in voltage: 22.0 lowest 29.0 highest; nuclear hardness critical item
MRC:
Indicates the type of fuel(s) for which the item is designed.FUEL
Fuel Type:
Jet fuel
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
Af to. 1b-2a-4-49
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
1w025-daa3243+003g specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-p-8686 government specification
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Ii type
