Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
There are four holes in the plate with dia. 0, 2570 with variation of plus 0.005 in. And minus 0.001 in.
NSN
National Stock Number:
TXT
Description:
Double Angle Bracket
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.0000 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.0000 inches
First Leg Hole Diameter:
Between 0.2560 inches and 0.2620 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.1250 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.1250 inches
Center Section Height:
2.6600 inches
Center Section Width:
2.0000 inches
Center Section Thickness:
0.1250 inches
First Leg Width:
2.6600 inches
First Leg End Width:
0.2000 inches
First Leg Distance From Edge To Hole Center Along Width:
1.3300 inches
First Leg Distance From Edge To Hole Center Along Length:
0.5000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Identical
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a-36 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Adjacent angles
