Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
(inavy)assembly, environmental cover
NSN
National Stock Number:
TXT
Description:
Access Cover
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat, square or rectangular rib reinforced
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
16.000 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.120 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.200 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.250 inches
Distance Between Holes Along Length:
6.480 inches
Distance Between Holes Along Width:
15.240 inches
Distance From First Hole Centerline To End Along Length:
0.860 inches
Distance From First Hole Centerline To End Along Width:
0.380 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.880 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
Indicates the type of cut on the corner/s/.CKWB
Corner Cut Type:
Round
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Consists of 4 helical coil inserts (no. 10-32 x 1); 11 helical coil inserts (0.138-32 x 1.5); 1 cover gasket (silicone rubber); and 1 panel environmental cover (aluminum alloy 6061 with chemical coversion coat); basic shape is altered in that there are multiple mounting hole (11 that are 0.138-32 unc 3b having full thread depth of 0.27 inches)(10 holes having 0.196 inch diameters)and the four holes mentioned in shape have 190-32 unf 3b helical coil inserts with 0.22 inch full thread depth)
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
