Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Flange To Tube Straight Adapter
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2 2nd end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
B-1b bomber
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Swaged w/ grooves (tube) 1st end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
0.220 inches 2nd end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
1.845 inches 2nd end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Oval with holes 2nd end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 2nd end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Unthreaded internal tube 1st end
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
4000.0 pounds per square inch single response
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.120 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.205 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
0.205 inches 2nd end
MRC:
The center to center nominal distance between bolt holes along the length of an item.CWCY
Center To Center Distance Between Bolt Holes Along Length:
1.562 inches 2nd end
MRC:
The center to center nominal distance between bolt holes along the width of an item.CWDC
Center To Center Distance Between Bolt Holes Along Width:
1.562 inches 2nd end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised straight 2nd end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.100 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
0.750 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the recess,and terminates at the circumference.CWDP
Recess Diameter:
0.5095 inches 2nd end
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
0.500 inches all ends
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Heat treatment is anneal and vacuum degas, with final hydrogen not exceeding 10 ppm maximum after all processing; polytetrafluoroethylene finish is black; item weight in lbs is 0.91
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams4921 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic polytetrafluoroethylene
