Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Fend play measured under a 15 lb load also 0.0880 in. Wide by 1.4260 in. Diameter groove in bore also od of outer ring undercut on one side also selected, classified and tested by the assembly mfr at his plant
NSN
National Stock Number:
TXT
Description:
Annular Ball Bearing
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 1.3122 inches and 1.3125 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 1.7496 inches and 1.7500 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Oil
Outer Ring Width:
Between 0.4950 inches and 0.5000 inches
Inner Ring Width:
Between 0.5520 inches and 0.5570 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Angular
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The direction of the internal fit-up contact angle at point of contact.AGZK
Internal Fit-up Contact Angular Direction:
Outward convergent
MRC:
The size of the angle formed at the force point of contact.CTHY
Contact Angle:
25.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
End play measured under a 15 lb load also 0.0880 in. Wide by 1.4260 in. Diameter groove in bore also od of outer ring undercut on one side also selected, classified and tested by the assembly mfr at his plant
MRC:
The chemical compound or mechanical mixture properties with which the item is lubricated.LBMA
Lubrication Material:
Oil
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
Mil-l-6085 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
26a non-loading groove, non-separable
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-loading groove, non-separable
