Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Cooling tower-not incl.; evaporator condenser-not incl.; accessories-not incl.; sgl pkg, compact horizontal unit
NSN
National Stock Number:
TXT
Description:
Air Conditioner
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor or wall
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 50.0 hertz and 60.0 hertz
MRC:
Indicates the designed use of the item.ALCD
Usage Design:
Compressor, condenser fan, evaporator fan
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
115.0 volts
MRC:
Indicates the type of coolant used with the item.ARNA
Coolant Type:
Freon-22
MRC:
The source of power which drives the item.ATJK
Power Source:
Electric motor
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
3
MRC:
Indicates the type of cooling for which the condenser is designed.AZAD
Condenser Cooling Type:
Air
MRC:
Indicates the type of compressor unit for which the item is designed.AZSD
Compressor Unit Type:
Closed
MRC:
The nominal capacity of the item to cool.AZSF
Cooling Capacity:
375.0 cubic feet per minute
MRC:
The nominal capacity of the item to heat.AZSH
Heating Capacity:
375.0 cubic feet per minute
MRC:
The chemical compound or mechanical mixture properties of which the cabinet is fabricated.CYGG
Cabinet Material:
Aluminum-copper free
MRC:
The capacity of the item to cool,expressed in british thermal units per hour.CYJE
Cooling Capacity In Btu Per Hour:
9000.0
MRC:
The capacity of the item to heat,expressed in british thermal units per hour.CYKM
Heating Capacity In Btu Per Hour:
6200.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
94833-f9000-1sa drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
