Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Type xiv class f
NSN
National Stock Number:
TXT
Description:
Maintenance Truck
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Steel
MRC:
The number of cylinders incorporated in the item.AAXZ
Cylinder Quantity:
Any acceptable
MRC:
The number of batteries required for operation.AEXR
Battery Quantity:
1
MRC:
The number of wheels included on the item.AGDH
Wheel Quantity:
6
MRC:
The number of drive wheels included on the item.AGDJ
Drive Wheel Quantity:
2
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Gasoline engine and diesel engine
MRC:
The power actually delivered by the engine,at a specified speed,which is available for driving the item.ALKK
Engine Brake Horsepower:
Any acceptable
MRC:
The rotary speed of the engine at which the horsepower rating is determined,expressed in revolutions per minute.ALKL
Engine Horsepower Rating Speed In Rpm:
Any acceptable
MRC:
The electric potential that a battery can provide,expressed in volts.ANLJ
Battery Voltage Rating In Volts:
12.0
MRC:
The number of reverse speeds provided.ATWQ
Reverse Speed Quantity:
Any acceptable
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Any acceptable
MRC:
The number of seating places provided.BTLY
Seating Capacity:
6
MRC:
The load capacity of the item as rated by the manufacturer.CNTJ
Rated Load Capacity:
1.50 tons
MRC:
Indicates the location of the drive axle on the item.CNTK
Drive Axle Location:
Rear
MRC:
Indicates the type of mechanism used to transmit power at the rear wheels.CNTL
Axle Drive Type:
Conventional
MRC:
The number of rear axle speeds.CNTM
Axle Speed Quantity:
2
MRC:
Indicates the type of rear wheel mounting provided.CNTQ
Rear Wheel Mounting Type:
Dual
MRC:
The nominal distance between front and rear axles or between the front axle and center point of rear multi-axle assemblies/tandems,tridems,etc./.CNTR
Wheelbase:
Any acceptable
MRC:
The nominal tread distance between the centers of the front wheels.CNTS
Front Wheel Tread Width:
Any acceptable
MRC:
The nominal tread distance between the centers of the rear wheels.CNTT
Rear Wheel Tread Width:
Any acceptable
MRC:
Indicates the type of cab mounted on the chassis independent of body and/or specialized equipment.CNYS
Cab Type:
Crew
MRC:
Indicates the type of covering furnished for the cab.CNYT
Cab Roof Type:
Closed
MRC:
The means by which the brakes are actuated.CNYW
Brake Actuation Method:
Hydraulic and vacuum
MRC:
Indicates the type of storage compartment provided.CNYX
Storage Compartment Type:
Utility
MRC:
An indication of the means of access to the storage compartment.CNYY
Storage Compartment Accessibility:
Outside
MRC:
Indicates the location of the entrance to the center aisle.CNZX
Center Aisle Entrance Location:
Back
MRC:
A measurement of the longest nominal outside dimension of the maintenance body.CPBK
Maintenance Body Outside Length:
Any acceptable
MRC:
A nominal outside measurement taken at right angles to the length of the maintenance body of the item.CPBL
Maintenance Body Outside Width:
Any acceptable
MRC:
A nominal outside measurement from the bottom to the top of the maintenance body.CPBM
Maintenance Body Outside Height:
Any acceptable
MRC:
The maximum weight of a fully equipped vehicle and allowable payload of cargo or passengers.CPKD
Vehicle Maximum Gross Weight:
10000.00 pounds
MRC:
The number of doors provided on the cab.CPLG
Cab Door Quantity:
4
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Base maintenance
