Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Cconsists of two rods couples together by a quick-disconnect sleeve which permits all four wheels to be turned 90 degrees when rod is uncoupled, for sidewise positioning of trailer in limited areas
NSN
National Stock Number:
TXT
Description:
Steering Tie Rod
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
0.470 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
0.875 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
0.625 inches
MRC:
The direction of the stud end thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ADDR
Stud End Thread Direction:
Right-hand
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
10.0 rockwell c and 26.0 rockwell c
MRC:
An indication of whether or not the item is adjustable.APCS
Adjustability:
Adjustable
MRC:
Designates the stud thread diameter and number of threads per specific measurement scale.AQLF
Stud Thread Size:
1/2-20
MRC:
The structural characteristic of the item.ARQS
Construction:
Tubular
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Ball stud
MRC:
The distance from the centerline of the ball stud to the threaded end.CFCT
Distance From Ball Stud Centerline To Threaded End:
0.688 inches
MRC:
The center to center distance between the connecting centers.CFDC
Center To Center Distance Between Connecting Centers:
24.600 inches
MRC:
An indication of whether or not a rod end lock clamp is included.CFDF
Rod End Lock Clamp:
Included
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specified diameter of a stud end.CMLD
Stud End Thread Series Designator:
Nf
MRC:
A measurement of the extent of threads,including incomplete threads,of a stud end measured along a line parallel to the longitudinal axis.CMLJ
Stud End Thread Length:
0.640 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Consists of two rods couples together by a quick-disconnect sleeve which permits all four wheels to be turned 90 degrees when rod is uncoupled, for sidewise positioning of trailer in limited areas
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The physical configuration of the item.SHPE
Shape:
Straight
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Trailer, aircraft engine
