Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.0625 inches both ends
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.0625 inches second end
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.125 inches first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
1.000 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
138-32 thd size both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.3125 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.0000 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Bonded rubber
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole first end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole both ends
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
1 both ends
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Both ends: drilled from the od to the id, spaced 90 degrees apart
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
1 first end
MRC:
Indicates the location of an unthreaded hole on the item.BSNW
Unthreaded Hole Location:
Both ends: drilled from the od to the id 0.156 in. From the edge; aligned with other 0.0625 in. Hole and 0.156 in. From edge; aligned with other 0.0625 in. Hole and 0.156 in. From edge
