Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Used with conflex fittings which will accept tubingsizes 3/16 in. Min, 3/4 in. Maximum for each of two branchesand 3/16 in. Min, 1 in. Maximum for the base end
NSN
National Stock Number:
TXT
Description:
Electrical Conduit Wye
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b first end
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b second end
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b third end
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.562 inches third end
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.250 inches first end
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.250 inches second end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Any acceptable first end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Any acceptable second end
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Any acceptable third end
MRC:
The degree of deflection between two straight lines of a circle.ABEX
Deflection Angle:
30.0 degrees
MRC:
Indicates the type of conduit which the item is designed to accommodate.AELS
Conduit Type Accommodated:
Any acceptable first end
MRC:
Indicates the type of conduit which the item is designed to accommodate.AELS
Conduit Type Accommodated:
Any acceptable second end
MRC:
Indicates the type of conduit which the item is designed to accommodate.AELS
Conduit Type Accommodated:
Any acceptable third end
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
Any acceptable first end
MRC:
Indicates the type of end.APTD
End Type:
Internal thread first end
MRC:
Indicates the type of end.APTD
End Type:
Internal thread second end
MRC:
Indicates the type of end.APTD
End Type:
Internal thread third end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.250 inches second end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.250 inches first end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.562 inches third end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate and cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Typical
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unef first end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unef second end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unef third end
