Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Needle hypodermic c19a pneumothorax refill 2.172-2.328" nonster
NSN
National Stock Number:
TXT
Description:
Hypodermic Needle
MRC:
The number of items contained in the unit package.AGUC
Unit Package Quantity:
1
MRC:
Indicates the type of container in which the item of supply is packaged.AGXZ
Unit Package Type:
Bag
MRC:
Indicates the type of hub provided.ANNM
Hub Type:
Luer lock
MRC:
The designation of the wall thickness of the cannula.ANNN
Cannula Wall Thickness Designation:
Heavy
MRC:
The designation applied to the slant or inclination of the cannula at the injection point.ANNP
Cannula Bevel Designation:
Very short
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Brass hub err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Brass stylet knob err-100 err-100 and steel, high silicon stylet knob err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, gg-i-526, class 3, type 304 cannula err-100 err-100 and steel, gg-n-196, type 1 cannula err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, gg-i-526, class 3, type 304 stylet wire err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Brass hub
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, gg-i-526, class 3, type 304 stylet wire
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Chromium plated hub err-100 err-100 and nickel plated hub err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Chromium-nickel plated, gg-i-526, class 8 stylet knob err-100 err-100 and nickel, qq-n-290, class 1, type 6 stylet knob err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
MRC:
A universal standard stubs needle gage designation representing the outside diameter of the needle cannula and its location on the item.ANNS
Needle Cannula Gage Designation And Location:
18 gage cannula
MRC:
Indicates the type of container with which the item is in direct contact.ANNW
Immediate Container Type:
Rack, cardboard or rack, metal or rack, plastic
MRC:
The number of immediate containers.ANNX
Immediate Container Quantity:
1
MRC:
The number of items within each immediate container.ANNY
Quantity Within Each Immediate Container:
1
MRC:
A measurement of the longest dimension of the cannula,in distinction from width.ANPC
Cannula Length:
Between 2.172 inches and 2.328 inches
MRC:
The measured weight of the exterior container.ECWT
Exterior Container Weight:
89.00 pounds
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the exterior container and rendered in cubic units.EXME
Exterior Container Cubic Measure:
6.00 cubic feet
MRC:
The number of units of issue placed inside the exterior container.EXQT
Exterior Container Quantity:
1728
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
W/plugged bevel end and side opening on point
MRC:
The number of wraps,boxes,or bundles,which contains two or more units of issue,placed inside an exterior container.PKQT
Intermediate Package Quantity:
12
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Pneumothorax refill w/ stub needle gage numbe (s)
MRC:
A measurement of volume taken by multiplying the length by the width by the height of the unit of issue and rendered in cubic units.SUCB
Unit Of Issue Cube:
0.009 cubic feet
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
0.06 pounds
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
2 style
MRC:
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.ZZZW
Departure From Cited Document:
As modified by quantity within each immediate container, as modified by unit package type, as modified by unit package quantity, as modified by special features
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
As modified by cannula length, as modified by material and location, as modified by surface treatment and location, as modified by cannula bevel designation
