Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Entire item is bent 15 degrees 0.190 in. From center of mtg holes; may be used w/class 37tb terminal board, mil-t-55164
NSN
National Stock Number:
TXT
Description:
Conductor Bus
MRC:
The physical configuration of the body when viewed in cross section.AAWN
Body Cross-sectional Shape:
Oblong
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.750 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.032 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.690 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
5895-01-269-3572 landing control central
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Five tabs 0.234 in. Min and 0.266 in. Maximum w, ea tab has a 0.153 in. Min and 0.159 in. Maximum diameter hole located 0.375 in. C to c; ea tab is 0.410 in. Deep by 0.120 in. W
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 260 or copper alloy 268
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-613, alloy 260 federal specification single material response or qq-b-613, alloy 268 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Copper and nickel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-n-290, class 2 federal specification single treatment response
