Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Stud socket assembly - low mag
NSN
National Stock Number:
TXT
Description:
Wire Rope Socket
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABXG
Overall Length:
Between 4.16 inches and 4.22 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Apl update; next assembly 6096933; used on 6096930
MRC:
The length of a straight line which passes through the center of a stud,and terminates at the circumference.AGRJ
Stud Diameter:
0.375 inches
MRC:
The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.AHNK
Accommodated Material Diameter:
0.375 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Stud end is 0.375-24 unf-2a; rope accomodation is 0.187; for use with wire rope per mil-w-5693, type ii, 0.188 dia, 1x19 construction, type 304, cond a; min. Breaking strength is 3300lb; first hex across flats is 0.62, second hex across flats is 0.56
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Cres, type 304, cond a mfr ref single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35, type 1 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Stud end
