Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Wiper Ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Outside grooved, straight face
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
1.500 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.777 inches and 1.782 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.115 inches and 0.125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the ring.ACXD
Ring Style:
Concentric
Outer Edge Thickness:
Between 0.084 inches and 0.094 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the joint.ADTE
Joint Style:
Diagonal joint
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Bronze or brass or copper silicone alloy or rubber
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-679 comp 1 federal specification 1st material response or qq-b-750, comp a, hard federal specification 1st material response or qq-a-620, comp 3, 4, 5 hard federal specification 1st material response or qq-b-728 cl a, half hard, cl b, all tempers federal specification 1st material response or qq-b-726 cl a federal specification 1st material response or qq-b-626 hard federal specification 2nd material response or qq-c-591-all classes, half hard or hard federal specification 3rd material response or mil-p-25732 type r, cl 2 military specification 4th material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class 2 federal specification single treatment response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-s-5049 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
Cl2 item
