Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
1.062 in. Min. 1.093 in. Max. Wide by 1.500 in. Oblong hole on shank end 0.311 in. Min. 0.318 in. Max. Dia. By 0.690 in. Min. 0.720 in. Max. Deep axial locking groove
NSN
National Stock Number:
TXT
Description:
Headless Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Counterbored w/o through hole
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
4.875 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 2.240 inches and 2.250 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
2.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.250 inches
Second End Counterbore Diameter:
Between 1.250 inches and 1.262 inches
Second End Counterbore Depth:
0.880 inches
First End Taper Length:
0.500 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
40.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Shank end
First End Taper Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-13
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5629, cond a assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
