Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Dog spindle
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
0.1250 inches
First End Groove Diameter:
0.5000 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved, cross drilled hole, and externally threaded
Second End Groove Width:
0.1250 inches
Second End Groove Diameter:
0.6250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.5625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Hatch, water tight (w.T.), flush, quick acting (q.A.) 24 inch x 30 inch 5 psi je-1153-8
First End Distance From End To Groove:
0.750 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.6250 inches
First End External Thread Length:
0.750 inches
Second End Distance From End To Groove:
0.625 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7500 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.2500 inches
Second End Distance From Hole Center To End:
1.000 inches
Second End External Thread Length:
0.625 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.750 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
9
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.250 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
After circular groove, first end has 0.6215-0.6230 inch across flats x 0.6875 long square shoulder. Shaft second end has axial and internal 0.250 inch diameter x 1.000 deep hole and 0.3125-24unf-3a x 0.625 long threads. Center of shaft has 0.875-7 left hand, double lead acme threads with pitch diameter 0.7906-0.8036. Material has magnetic permeability of less than 2.0
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
