Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Color, yellow, fed, std 595, 33578
NSN
National Stock Number:
TXT
Description:
Nonmetallic Special Shaped Secti
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Unable To Decode:
Unable to decode and unable to decode
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
35.0 shore durometer a and 45.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
900 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees celsius and 100.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.360 inches and 0.440 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.222 inches and 0.320 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 120.000 inches and 144.000 inches
Right Side Flange Height:
Between 0.360 inches and 0.440 inches
Left Side Flange Thickness:
Between 0.017 inches and 0.047 inches
Right Side Flange Thickness:
Between 0.065 inches and 0.095 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Corrosion and oil resistant and tear and low temperature and heat, dry and weather resistant
First Slot/groove Depth:
0.169 inches
Second Slot/groove Depth:
0.169 inches
Err Default:
Err default and err default
Isthmus Width:
Between 0.047 inches and 0.077 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.CTGJ
Cross Sectional Shape:
C298
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Color, yellow, fed, std 595, 33578, matt: rubber, synthetic, chloroprene type, ams 3240
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81343-ams 3240 professional/industrial association standard
