Part Information
External protection type and location- spring guard, round stainless steel coil , inner conveying tube material-rubber, synthetic

NSN

National Stock Number:

4720-01-460-6467 4720014606467

TXT

Description:

Nonmetallic Hose Assembly

INC

Item Name Code:

20311

MRC:

The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR

Cross Sectional Shape:

Round

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX

Inside Diameter:

1.000 inches

MRC:

A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH

Tempurature Rating:

-40.0 degrees fahrenheit single response and 250.0 degrees fahrenheit single response

MRC:

A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU

Flange Thickness:

0.295 inches 1st end

MRC:

The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV

Outside Diameter:

1.542 inches

MRC:

The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH

Minimum Inside Bending Radius:

12.000 inches

MRC:

The amount of rotation in a counterclockwise direction needed to bring the centerline of one rigid elbow into coincidence with the centerline of the rigid elbow on the opposite end,expressed in degrees.ADKX

Angle Between Rigid Elbow Fittings In Deg:

90.0

MRC:

The specification or standard /industrial or governmental/ that specifically covers the construction of the hose or tubing,excluding the end fittings.ADLF

Hose Or Tubing Specification/std Data:

Sae100r12 standard (includes industry or association standards, individual manufactureer standards, etc.).

MRC:

The specification or standard /industrial or governmental/ that specifically covers one complete end fitting.ADLG

First End Fitting Specification/std Data:

Sae j518 standard (includes industry or association standards, individual manufactureer standards, etc.).

MRC:

A measurement of the center to center distance between the bolt holes along the width.ADUY

Center To Center Distance Between Bolt Holes Along Width:

1.093 inches 1st end

MRC:

A measurement of the center to center distance between the bolt holes along the length.ADUZ

Center To Center Distance Between Bolt Holes Along Length:

2.312 inches 1st end

MRC:

The number of bolt holes provided on the item.AECS

Bolt Hole Quantity:

4 1st end

MRC:

A measurement of the longest dimension of a flange,in distinction from width.AFQN

Flange Length:

3.190 inches 1st end

MRC:

The national stock number or the identification information of the end equipment for which the item is a part.AGAV

End Application:

M1 abrahms launcher and portable bridge

MRC:

A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF

Flange Width:

2.750 inches 1st end

MRC:

The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC

Connection Style:

Plain swivel w/ gasket groove 1st end

MRC:

The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX

Bolt Hole Diameter:

0.469 inches 1st end

MRC:

The design used in constructing the end portion of the flange.AKUT

End Flange Construction:

Split 1st end

MRC:

The physical configuration of the outside of the end connection.AKUU

End Connection Design:

Elbow 1st end

MRC:

The name of the fitting and/or component and the element, compound, or mixture of which it is fabricated.AKXL

End Fitting Component And Material:

Complete fitting steel all ends

MRC:

The name of the fitting and/or component and the plating, dip and/or coatingthat cannot be wiped off. plating and/or coating is any chemical and/or metallic additive, electrochemical or mild mechanical process which protects the surface.AKXM

Fitting Component And Surface Treatment:

Complete fitting cadmium 1st end

MRC:

Indicates the type of connection/s/.AWLS

Connection Type:

Plain face flange 1st end

MRC:

Indicates whether or not the second end is identical to the first end.CQBB

Second End Relationship With First End:

Identical

MRC:

The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD

Burst Test Pressure:

16000.0 pounds per square inch

MRC:

An indication of whether or not the end has the capability to rotate.CQBG

First End Swivel Action Capability:

Included

MRC:

The material and formation identifying the structural characteristic/s/ of the item and location.CQCS