Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
Outer layer-wound right hand lay; weapon system essential
NSN
National Stock Number:
TXT
Description:
Flexible Shaft Assembly Core
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 157.047 inches and 157.359 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Radar set, firefinder (an/tpq-36); truck, cargo, dropside, xlwb, 5-ton, 6x6 (m814, m927, m928); truck, tractor, 5-ton, (m818, m931); truck, wrecker, 5-ton (m936); truck, cargoo, dropside, 5-ton, 6x6 (m813a1, m-923, m-925); truck, dump, 5-ton m939 series; truck, tractor, 5-ton (m818, m931); truck, 5-ton m939 series
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
Between 1.018 inches and 1.022 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
Between 0.950 inches and 1.010 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
MRC:
The length of a straight line which passes through the center of the core,and terminates at the circumference.AKMH
Core Diameter:
Between 0.128 inches and 0.152 inches
MRC:
Indicates the type of end.APTD
End Type:
Round keyed
MRC:
Indicates the type of end.APTD
End Type:
Square male
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.101 inches across flats err-100 and 0.104 inches across flats err-100
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.150 inches diameter err-100 and 0.153 inches diameter err-100
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
MRC:
Designates the size of the relative or proportionate dimensions of the machined feature of the item.CFQX
Machined Feature Size:
0.057 in. Min, 0.060 in. Maximum thk by 0.281 in. Min lg drive key
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Any acceptable
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
1. Tachometer, carrier, personnel
