Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
First end partial bore, 0.344 in. Dia, 1.125 in. Dp; first end c'bore, 0.374/0.375 in. Dia, 1.000 in. Dp; splines on largest od, 14 teeth, 8/16 dp, 30 degrees pressure angle, 1.750 pd
NSN
National Stock Number:
TXT
Description:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Slotted
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Flat groove and woodruff keyway
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.000 inches
First End Slot Width:
0.188 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.2490 inches and 1.2500 inches
First End Slot Depth:
0.297 inches
Second End Distance From End To Flat:
0.344 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.2487 inches and 0.2505 inches
Second End External Keyway Length:
1.250 inches
Second End Distance From Keyway Center To End:
0.750 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.2490 inches and 1.2500 inches
Second End Grooved Flat Length:
0.3750 inches
Second End Grooved Flat Depth:
0.063 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.849 inches and 1.852 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620h
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification single material response
