Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Truck Tractor
MRC:
The number of cylinders incorporated in the item.AAXZ
Cylinder Quantity:
6
MRC:
The number of batteries required for operation.AEXR
Battery Quantity:
4
MRC:
The number of wheels included on the item.AGDH
Wheel Quantity:
6
MRC:
The number of drive wheels included on the item.AGDJ
Drive Wheel Quantity:
6
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Diesel engine
MRC:
The power actually delivered by the engine,at a specified speed,which is available for driving the item.ALKK
Engine Brake Horsepower:
250.0
MRC:
The rotary speed of the engine at which the horsepower rating is determined,expressed in revolutions per minute.ALKL
Engine Horsepower Rating Speed In Rpm:
2100.0
MRC:
The electric potential that a battery can provide,expressed in volts.ANLJ
Battery Voltage Rating In Volts:
12.0
MRC:
The number of reverse speeds provided.ATWQ
Reverse Speed Quantity:
1
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Automatic
MRC:
The number of forward speeds in each range.AXJF
Forward Speed Quantity Per Range:
5
MRC:
The number of seating places provided.BTLY
Seating Capacity:
3
MRC:
Indicates the type of fifth wheel provided on the item.CGNY
Fifth Wheel Type:
Lower fifth wheel coupler
MRC:
The load capacity of the item as rated by the manufacturer.CNTJ
Rated Load Capacity:
5.00 tons
MRC:
Indicates the location of the drive axle on the item.CNTK
Drive Axle Location:
Front and rear
MRC:
Indicates the type of mechanism used to transmit power at the rear wheels.CNTL
Axle Drive Type:
Conventional
MRC:
The number of rear axle speeds.CNTM
Axle Speed Quantity:
1
MRC:
Indicates the type of front axle engaging mechanism.CNTP
Front Axle Engaging Mechanism Type:
Automatic
MRC:
Indicates the type of rear wheel mounting provided.CNTQ
Rear Wheel Mounting Type:
Dual
MRC:
The nominal distance between front and rear axles or between the front axle and center point of rear multi-axle assemblies/tandems,tridems,etc./.CNTR
Wheelbase:
167.00 inches
MRC:
The nominal tread distance between the centers of the front wheels.CNTS
Front Wheel Tread Width:
75.00 inches
MRC:
The nominal tread distance between the centers of the rear wheels.CNTT
Rear Wheel Tread Width:
72.00 inches
MRC:
An indication of whether or not a multifuel design feature is included.CNTW
Multifuel Design Feature:
Not included
MRC:
The number of forward speed ranges provided.CNTX
Forward Speed Range Quantity:
1
MRC:
Indicates the type of adjunct transmission provided.CNTY
Transmission Adjunct Type:
Transfer
MRC:
The number of speeds provided in the transmission adjunct.CNTZ
Transmission Adjunct Speed Quantity:
2
MRC:
Indicates the type of cab mounted on the chassis independent of body and/or specialized equipment.CNYS
Cab Type:
Conventional
MRC:
Indicates the type of covering furnished for the cab.CNYT
Cab Roof Type:
Open
MRC:
The means by which the brakes are actuated.CNYW
Brake Actuation Method:
Air
MRC:
The nominal distance from the back of the cab to the fifth wheel center.CPBF
Fifth Wheel Center To Cab Distance:
89.810 inches
MRC:
The maximum weight of a fully equipped vehicle and allowable payload of cargo or passengers.CPKD
Vehicle Maximum Gross Weight:
35358.00 pounds
MRC:
The number of doors provided on the cab.CPLG
Cab Door Quantity:
2
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
19207-8736990 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
