Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Electrical-electronic Compo Oven
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
1.031 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.531 inches
MRC:
A measurement taken at right angles to the length of the body,in distinction from thickness.ADAT
Body Width:
1.406 inches
MRC:
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.AKNA
Inclosure Type:
Inclosed
MRC:
The designation assigned to the crystal holder(s) for which the item is designed.AYNE
Crystal Holder Designator:
Hc-6/u
MRC:
The value which expresses the degree of controlled temperature maintained in the oven cavity.AYNF
Maintained Oven Cavity Tempurature Rating:
75.0 degrees celsius
MRC:
The limits of permissible variation of an item from its controlled temperature rating.AYNG
Maintained Tempurature Tolerance Rating:
-5.0/+5.0 degrees celsius
MRC:
Indicates the operating voltage type that is applied to the heater element,expressed in volts.AYNJ
Heater Element Operating Voltage Rating In Volts And Type:
Between 24.0 dc and 29.0 dc
MRC:
The maximum amount of electrical energy that can be expended for proper operation of an item,measured in watts.AYNL
Operating Power Dissipating Rating In Watts:
40.0
MRC:
The maximum time required to reach the controlled temperature,expressed in minutes.AYNM
Maximum Warm Up Time In Minutes:
6.0
MRC:
The distance measured in a straight line from the bottom to the top of the body.AZTK
Bodyheight:
1.906 inches
MRC:
Indicates the type and number of components accommodated by the item.CZEH
Component Type And Quantity Accommodated:
1 crystal
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Miniature plug-in
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
37695-167995 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
8 standard tube base
