Part Number
DEMIL
Shelf Life
UOM
NIIN
Part:
mil-d-80002ty2clasz22
NSN
National Stock Number:
TXT
Description:
Upright Drilling Machine
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the type of head provided.AJGD
Head Type:
Sliding
MRC:
An indication of whether or not a treatment is included to produce a fungus resistant condition.AKSQ
Fungus Resistant Treatment:
Not included
MRC:
An indication of whether or not shielding against radio interference is provided.ALBH
Radio Interference Shielding:
Not provided
MRC:
An indication of whether or not a reversible rotation feature is included.ALYE
Rotation Reversibility Feature:
Included
MRC:
Indicates the type of feed provided.AQDD
Feed Type:
Hand
MRC:
The number of spindles provided.BCRH
Spindle Quantity:
1
MRC:
Indicates the type of main drive provided for turning,rotating,or positioning the mechanism.BNQL
Main Drive Type:
Electric motor
MRC:
Designates the commercial taper size of the spindle socket.BNRK
Spindle Socket Taper Size:
3 morse
MRC:
The distance the spindle will travel.BNRL
Spindle Travel Distance:
10.000 inches
MRC:
The drilling capability/ies/ of the item.BNRY
Drilling Capability:
1.250 in mild steel
MRC:
Indicates the type of column provided on the item.BNRZ
Column Type:
Box
MRC:
The distance from the center of the spindle to the column.BNSD
Distance From Spindle Center To Column:
12.000 inches
MRC:
Indicates the type of upper working surface provided on the item.BNSN
Upper Working Surface Type:
Slotted w/coolant trough
MRC:
The physical configuration of the upper working surface.BNSP
Upper Working Surface Shape:
Rectangular
MRC:
A measurement of the longest dimension of the upper working surface,in distinction from width.BNSS
Upper Working Surface Length:
22.000 inches
MRC:
A measurement taken at right angles to the length of the upper working surface,in distinction from thickness.BNST
Upper Working Surface Width:
18.000 inches
MRC:
An indication of whether or not an upper working surface adjustment feature is included.BNSW
Upper Working Surface Adjustment Feature:
Included
MRC:
The distance the upper working surface can be adjusted vertically.BNSX
Upper Working Surface Vertical Adjustment:
14.000 inches
MRC:
The measured distance the head can be adjusted vertically.BPSX
Head Vertical Adjustment:
10.000 inches
MRC:
Indicates the type of spindle provided.BQLR
Spindle Type:
Tapered socket
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
4
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+650.0/+2004.0
MRC:
Indicates the location of the item on which the upper working surface is mounted.BWJN
Upper Working Surface Mounting Location:
Over lower round table
MRC:
The maximum distance from the chuck or spindle nose to the upper working surface.BWJP
Maximum Distance From Chuck/spindle Nose To Upper Working Surface:
29.250 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
220.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
