Part Number
DEMIL
Shelf Life
UOM
NIIN
Part:
mil-l-13896clasz1912
NSN
National Stock Number:
TXT
Description:
Engine Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Standard duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Std equip, morse tapr no4; digitalreadout; wrench kit; work light; drive plate; thread chasn dial; 6in spndl nose; large face plate; chuck w/jaws
MRC:
Indicates the design type of the item.APGF
Design Type:
Plain
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
7.500
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Sliding gap
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
12
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+25.0/+1000.0
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
12.000 inches
MRC:
A measurement of the rated swing through the open gap.BTWC
Rated Swing Through Open Gap:
34.000 inches
MRC:
A measurement of the actual swing through the open gap.BTWD
Actual Swing Through Open Gap:
34.000 inches
MRC:
A measurement of the rated swing over the closed gap.BTWF
Rated Swing Over Closed Gap:
19.000 inches
MRC:
A measurement of the actual swing over the closed gap.BTWG
Actual Swing Over Closed Gap:
19.000 inches
MRC:
The center to center distance of the item when open.BTWJ
Err Default:
Err default
MRC:
The center to center distance of the item when closed.BTWK
Err Default:
Err default
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Geared head
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
Morse
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
1.750 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand and power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand and power
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
