Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0accessory components and qty, file band guides 1/4 in. W, 1 set, file band guides 1/2 in. W, 1 set; back-up roller bearing for 1/8, 3/16, 1/4, 3/8, 1/2, and 3/4 in. W blades, 1 set; jaw holding 1; shielded table light 1; etching pencil 1; rip fence 1
NSN
National Stock Number:
TXT
Description:
Metal Cutting Band Saw
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.000 hertz
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Aluminum oxide abrasive band, 1 in. W, 12 ea, no. 50, no. 80, no. 150; saw blade guide adapter set, 90 degrees 1; drive belt set 1; flexible back conventional tooth set, band saw blade, raker set, 100 ft coils per ggg-b-421, type 1, style 1, 8 coils 0.025 in. Thk, w in in. And teeth as follows 1/8 14, 1/8 18, 1/8 24, 1/4 10, 1/4 18, 1/4 24, 1/2 6, 1/2 10, 2 coils 0.032 in. Thk, 3/4 10; skip tooth flexible back band saw blade, 100 ft coils per ggg-b-421, type 1, style 2, 2 coils 0.025 in. Thk, w in in. And teeth as follows 1/4 6, 1/2 4, 1 coil 0.032 in. Thk, 3/4 3; 1 pump and chip blower, 1 circle cutting attachment; 1 cut off-mitre attachment; med cut flat bastard file bands 1 ea 1/4 in. W, 1/2 in. W; oval bastard file band med cut 1/4 in. W bands 1 set; file band guides 1 set ea for 1/4 in. 1/2 in. W bands; 1 set roller back-up bearing for 1/2, 3/16, 1/4, 3/8, 1/2, 3/4 in. W/blades; 1 holding jaw; 1 shielded table light; 1 etching pencil; 1 rip fence
MRC:
Indicates the type of frame included on the item.ALDF
Frame Type:
Rigid
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
208.000 volts
MRC:
The means by which the item is fed.AMWX
Feed Method:
Work into cutting band
MRC:
The speed at which an item has been tested and rated to perform without damage or failure of the rotating components,expressed in revolutions per minute.AMZE
Rotational Speed Rating In Rpm:
Any acceptable
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
1.500
MRC:
A measurement between specified points on the throat,in distinction from height.AQCL
Throat Depth:
15.250 inches
MRC:
An indication of whether or not a braking facility/ies/ is included.AQLX
Braking Facility:
Not included
MRC:
The means by which the item is driven.ARCM
Drive Method:
Electric motor
MRC:
A measurement of the longest dimension of a table,in distinction from width.ARDQ
Table Length:
24.000 inches
MRC:
A measurement taken at right angles to the length of a table,in distinction from thickness.ARDR
Table Width:
24.000 inches
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
Indicates the type of table provided.BNBB
Table Type:
Tilting
MRC:
The right tilt angle of the table,expressed in degrees.BWLY
Table Right Tilt Angle In Deg:
45.0
MRC:
The left tilt angle of the table,expressed in degrees.BWLZ
Table Left Tilt Angle In Deg:
10.0
MRC:
Indicates the type of band for which the item is designed.BWMC
Band Type For Which Designed:
File or saw blade
MRC:
The maximum measurement of the longest dimension of the file the item will accommodate,in distinction from width.BWMD
File Maximum Length Accommodated:
Any acceptable
MRC:
The maximum measurement taken at right angles to the length of the file the item will accommodate,in distinction from thickness.BWMF
File Maximum Width Accommodated:
0.500 inches
MRC:
The maximum measurement of the longest dimension of the blade the item will accommodate,in distinction from width.BWMG
Blade Maximum Length Accommodated:
Any acceptable
MRC:
The maximum measurement taken at right angles to the length of the blade the item will accommodate,in distinction from thickness.BWMH
Blade Maximum Width Accommodated:
0.750 inches
MRC:
An indication of whether or not a vise is provided.BWML
Vise:
Not provided
MRC:
The distance between the guide and the table.BWMN
Distance Between Guide And Table:
12.000 inches
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+50.0/+5200.0 feet per minute
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+50.0 to 5200.0 feet per minute
MRC:
An indication of whether or not an infinite cutting speed feature is provided.BWNC
Infinite Cutting Speed Feature:
Provided
MRC:
An indication of whether or not a power feed feature is provided.BWND
Power Feed Feature:
Provided
MRC:
An indication of whether or not a built-in coolant system is included.BWNG
Built-in Coolant System:
Not included
MRC:
An indication of whether or not an integral butt welder is included.BWNH
Integral Butt Welder:
Included
MRC:
An indication of whether or not an integral grinder is included.BWNJ
Integral Grinder:
Included
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Accessory components and qty, file band guides 1/4 in. W, 1 set, file band guides 1/2 in. W, 1 set; back-up roller bearing for 1/8, 3/16, 1/4, 3/8, 1/2, and 3/4 in. W blades, 1 set; jaw holding 1; shielded table light 1; etching pencil 1; rip fence 1
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
16 size
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
As modified by voltage rating
