Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Engine Lathe
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Light duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
1 chuck, 3 jaw, 10in.; 1 chuck, 4 jaw, 18in.; collet chuck and collets; sizes 1/16in. Through 1 3/8in.; drill chuck, 1/16in. To 1/2in.; 1 faceplate 23 1/2in.; 1faceplate, gap, 38in.; 1 faceplate jaw fol 23 1/2in. Faceplate; 1 faceplate jaw for 38in. Faceplate; 1 follow rest 1/2in.; 1 indexing square tool turret; 1 reselect speed change; 1 steady rest/std/ 3/4in. By 7in.; 1 steady rest/oversize/7in. By 12in.; 1 taper attachment 0 - 3 1/2in., 1; tools furnished in accordance with mfr standard practice
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
7.5
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Sliding gap
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
12
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+18.0/+720.0
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
18.000 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
48
MRC:
A measurement of the rated swing through the open gap.BTWC
Rated Swing Through Open Gap:
52.000 inches
MRC:
A measurement of the actual swing through the open gap.BTWD
Actual Swing Through Open Gap:
36.000 inches
MRC:
A measurement of the rated swing over the closed gap.BTWF
Rated Swing Over Closed Gap:
26.000 inches
MRC:
A measurement of the actual swing over the closed gap.BTWG
Actual Swing Over Closed Gap:
36.000 inches
MRC:
The center to center distance of the item when open.BTWJ
Err Default:
Err default
MRC:
The center to center distance of the item when open.BTWJ
Distance Between Open Centers:
84.000 inches
MRC:
The center to center distance of the item when closed.BTWK
Err Default:
Err default
MRC:
The center to center distance of the item when closed.BTWK
Distance Between Closed Centers:
48.000 inches
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Direct pulley, back geared
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
5 morse
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
2.188 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand and power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand and power
MRC:
The number of carriage feed changes provided.BTYT
Carriage Feed Change Quantity:
48
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+80.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
208.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
1 type and 2418/52 size
MRC:
The variation when the item is in conformity with a type designator covered by a specification or standard,except in regard to one or more technical differentiating characteristics.ZZZX
Departure From Cited Designator:
As modified by headstock center taper size designator, spindle speed range in rpm, voltage in volts, and additional equipment per mil-std 931
MRC:
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.ZZZY
Reference Number Differentiating Characteristics:
As differentiated by distance between open centers, dist between closed centers, elec motor quan, elec motor hp rating, current type, voltage in volts, freq in hertz, and phase
