Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
K2 suffix material shall have a mimum bond strength of 5 pounds per 1 in. Width, z1 suffix material shall be made of chloroprene rubber and shall not contain any polymers inferior to chloroprene in ozone resistance, z2 suffix, surfaces of the material shall be free of bloom, frosting, adhesives and migrating plasticizer, z3 suffix material shall not support the growth of micro-organisms
NSN
National Stock Number:
TXT
Description:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Open channel with round base
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-67.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.620 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
120.000 inches
Left Side Flange Thickness:
0.030 inches
Right Side Flange Thickness:
0.030 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Low temperature and ozone resistant
First Slot/groove Depth:
0.370 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.250 inches
First Slot/groove Width:
0.250 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-std-417, type s, class sc, grade sc510a1b1c2e3f2k2z1z2z3 military standard single material response
