Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Maintenance Truck
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Any acceptable
MRC:
The number of cylinders incorporated in the item.AAXZ
Cylinder Quantity:
Any acceptable
MRC:
The number of batteries required for operation.AEXR
Battery Quantity:
1
MRC:
The number of wheels included on the item.AGDH
Wheel Quantity:
4
MRC:
The number of drive wheels included on the item.AGDJ
Drive Wheel Quantity:
4
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Gasoline engine
MRC:
The power actually delivered by the engine,at a specified speed,which is available for driving the item.ALKK
Engine Brake Horsepower:
Any acceptable
MRC:
The rotary speed of the engine at which the horsepower rating is determined,expressed in revolutions per minute.ALKL
Engine Horsepower Rating Speed In Rpm:
Any acceptable
MRC:
The electric potential that a battery can provide,expressed in volts.ANLJ
Battery Voltage Rating In Volts:
12.0
MRC:
The number of reverse speeds provided.ATWQ
Reverse Speed Quantity:
Any acceptable
MRC:
Indicates the type of transmission used to transfer developed mechanical energy to the drive unit.AXJD
Transmission Type:
Manual
MRC:
The number of forward speeds provided.AXJH
Forward Speed Quantity:
Any acceptable
MRC:
The number of seating places provided.BTLY
Seating Capacity:
2
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Outrigger and pole derrick and towing pintle hook and turret
MRC:
Indicates the location of the drive axle on the item.CNTK
Drive Axle Location:
Front and rear
MRC:
Indicates the type of mechanism used to transmit power at the rear wheels.CNTL
Axle Drive Type:
Conventional
MRC:
The number of rear axle speeds.CNTM
Axle Speed Quantity:
2
MRC:
Indicates the type of front axle engaging mechanism.CNTP
Front Axle Engaging Mechanism Type:
Manual
MRC:
Indicates the type of rear wheel mounting provided.CNTQ
Rear Wheel Mounting Type:
Dual
MRC:
The nominal distance between front and rear axles or between the front axle and center point of rear multi-axle assemblies/tandems,tridems,etc./.CNTR
Wheelbase:
Any acceptable
MRC:
The nominal tread distance between the centers of the front wheels.CNTS
Front Wheel Tread Width:
Any acceptable
MRC:
The nominal tread distance between the centers of the rear wheels.CNTT
Rear Wheel Tread Width:
Any acceptable
MRC:
Indicates the type of cab mounted on the chassis independent of body and/or specialized equipment.CNYS
Cab Type:
Conventional
MRC:
Indicates the type of covering furnished for the cab.CNYT
Cab Roof Type:
Closed
MRC:
The means by which the brakes are actuated.CNYW
Brake Actuation Method:
Air
MRC:
Indicates the type of storage compartment provided.CNYX
Storage Compartment Type:
Utility
MRC:
An indication of the means of access to the storage compartment.CNYY
Storage Compartment Accessibility:
Outside
MRC:
Indicates the location of the derrick.CNZC
Derrick Location:
Rear
MRC:
Indicates the type of turret provided.CNZH
Err Default:
Err default
MRC:
Indicates the type of turret provided.CNZH
Turret Type:
Traversing
MRC:
Indicates the location of the entrance to the center aisle.CNZX
Center Aisle Entrance Location:
Back
MRC:
A measurement of the longest nominal outside dimension of the maintenance body.CPBK
Maintenance Body Outside Length:
137.00 inches
MRC:
A nominal outside measurement taken at right angles to the length of the maintenance body of the item.CPBL
Maintenance Body Outside Width:
Any acceptable
MRC:
A nominal outside measurement from the bottom to the top of the maintenance body.CPBM
Maintenance Body Outside Height:
Any acceptable
MRC:
The maximum weight of a fully equipped vehicle and allowable payload of cargo or passengers.CPKD
Vehicle Maximum Gross Weight:
28000.00 pounds
MRC:
The number of doors provided on the cab.CPLG
Cab Door Quantity:
2
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
1 type and a class and 70 size and 2 model
