Part Number
DEMIL
Shelf Life
UOM
NIIN
Part Information
0.562 in. Thk; 0.562 in. Bolt hole dia; 3.125 in. Bolt circle dia; zzztjcl1
NSN
National Stock Number:
TXT
Description:
Gate Valve
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.AAMW
Flange Diameter:
4.250 inches
MRC:
Indicates the type of housing on the item that accommodates the stem packing or spring.ADSR
Bonnet Type:
Outside screw-yoke
MRC:
The means by which the bonnet is attached to the item.ADST
Bonnet Attachment Method:
Bolted
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Manual
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange, round w/holes
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Bonnet packing
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
150.0 pounds per square inch fuel/oil, hydrocarbon
MRC:
Indicates the type of stem furnished with the item.CRKP
Stem Type:
Rising
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
500.0 degrees fahrenheit fuel/oil, hydrocarbon
MRC:
The face to face distance.CWCF
Face To Face Distance:
5.000 inches
MRC:
The design of the flange face.CWDF
Flange Face Design:
Plain
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel seat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel stem
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a105, gr 2 assn standard single material response body
