Part Number
DEMIL
Shelf Life
UOM
NIIN
NSN
National Stock Number:
TXT
Description:
Board Softwood Lumber
MRC:
Indicates the maxmium slope of grain in relation to the length of the item.CQHF
Maximum Grain Slope:
Any acceptable
MRC:
An indication of the species and grade of the item,and the grading association.CQWY
Species-grade And Grading Association:
Cedar, western no. 2 lath west coast lumber inspection bureau or cedar, western no. 2 lath western wood products association or douglas fir no. 2 lath west coast lumber inspection bureau or douglas fir no. 2 lath western wood products association or fir, subalpine no. 2 lath western wood products association or hem-fir no. 2 lath west coast lumber inspection bureau or hem-fir no. 2 lath western wood products association or hemlock, mountain no. 2 lath west coast lumber inspection bureau or hemlock, mountain no. 2 lath western wood products association or larch no. 2 lath western wood products association or pine, idaho white no. 2 lath western wood products association or pine, lodgepole no. 2 lath western wood products association or pine, ponderosa no. 2 lath western wood products association or pine, southern no. 2 lath southern pine inspection bureau or pine, sugar no. 2 lath western wood products association or redwood lath redwood inspection service or spruce, engelmann no. 2 lath western wood products association or spruce, sitka no. 2 lath west coast lumber inspection bureau
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Err Default:
Err default
MRC:
The moisture content retained in the item after seasoning,expressed in percent.CRCL
Moisture Content Retention Percentage:
19.0
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness,its location on the item,and the measuring method used.CRPW
Width-location And Measuring Method:
1.250 inches specified and 1.625 inches specified
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
4.000 feet specified
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width,its location on the item,and the measuring method used.CSHP
Thickness-location And Measuring Method:
0.250 inches specified and 0.375 inches specified
MRC:
The required purpose or application of the typical wood products for which the item is intended.CSTS
Typical Wood Products Use:
Lath ground work for plastering
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Unit of issue-bundle/50 pieces per bundle
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81348-mm-l-751 government specification
